?>
XLC 2-1 funktionspumpe PU-A04
Denne minipumpe er fremstillet af aluminium af høj kvalitet. Pumpeslangen til AV- og SV-ventiler giver komfortabel håndtering, selv ved utilgængelige cykelpositioner (bagdæmper). Takket være 2-vejspumpesystemet kan du producere op til 7 bar pumpetryk under både pumpning og trækbevægelse. En trykmåler viser dig, hvornår det ønskede dæktryk er nået, og udløserknappen gør det muligt at justere trykket præcist. Justeringshjulet på pumpehuset giver dig mulighed for at vælge mellem at pumpe med øget tryk eller øget volumen.
- til cykelslanger og affjedringssystemer
- pumper enten med høj volumen eller højt tryk
- med trykmåler
- med pumpeslange til AV/SV
- med udløserknap til præcis justering af trykket
.
Mærke | XLC |
---|---|
producentnummer | 2501923400 |
Pumpe type | Ophængspumpe |
Farve | Sølvgrå, Blå |
Ventiltyper | Bilventil (AV), Dunlop (DV), Fransk ventil (SV) |
Maks. tryk i bar | 20 bar |
Manometer | Ja |
materiale | Aluminium |
Leveringsomfang | 1 stk. |
Yderligere oplysninger | 2-way-system Pumps, which are equipped with a two-way system, build up pressure in both directions(both for the pressure movement as well as for the pull movement of the pump piston) The inflation process is so highly accelerated. High-Power mode For pumps fitted with high-power mode, it can be chosen between two pump modes.The pumps can be selectively switched over from the pump mode with a high volume into a pump mode with high pressure.This allows an extremely fast inflating of the tire with the final achievement of the desired pressure in the high-power mode. Manometer The gauge is a pressure measuring device for capturing and displaying of air pressure, such as bicycle inner tubes, forks or rear shock absorbers. Some of the XLC air pumps are serially ecquipped with manometers. Schrader-valve The Schrader valve is often found in mountain bikes. It also is used in motor vehicles, therefore it is often also called auto valve.One advantage of the Schrader valve is the possibility to inflate the tires on gas stations without the use of adapters. Sclaverand-valve The Sclaverand valve(also called french or racing bike valve) is high pressure capable and is suitable for MTB,racing or also tour bicycles.Condition for the filling is the screwing of the small knurled screw which is positioned on a threaded pin.In comparison to a car valve which close through a spring , the valve on the bike is closing up by overpressure of the tire. It dont has to be open mechanically because it opens itself already at a small pressure difference. |